.png){kind=logo}
Ferritic Stainless Steel
- Grade 430 Stainless Steel – It is not as stronger as austenitic Stainless Steel, but it has the ultimate resistance against nitric acid. It has a tensile strength of 450 MPa which is lower than austenitic steels. But it is stronger enough to be used for heavy-duty applications.
- Grade 434 Stainless Steel – This is the best stronger alternative to Grade 430 as it comes with a higher tensile strength of 540 MPa and also has a higher operating temperature of 815 degrees Celsius. This makes it better for high-temperature applications and it also has exceptional pitting resistance as compared to its counterpart.
Martensitic Stainless Steel
- Grade 420 Stainless Steel – This Stainless Steel alloy has a tensile strength of 586 MPa and when it is hardened and stress relieved, the tensile strength can increase up to 1600 MPa. But this alloy is not resistant to chemicals and hence this is the reason why it is used for cutlery.
So, these all the common Classification of Stainless Steel Wire that you will find around. But, before you buy any of these Stainless Steel alloys ensure to look at the Stainless Steel Wire Panels Price online to find the best deals and offers.
0.5mm ZR5668 Wire Material Specification
| Weight in meter | ≈1.31g/m |
| Quantity | 1meter |
| Odor | Odorless |
| Physical Form | Wires, ≈1.31g/meter |
| Purity in Percent | 99.2% |
| Chemical Material | Zr wires, 0.5milimeter (0.020 inch) dia., Annealed |
| Assay | (metals basis excluding Hf) Hf 4.5% max |
| Zirconium Material Chart | ERZr2, ERZr4, ERZr3, high purity zirconium |
| Size Chart | 0.3-6.0milimeter diameter x L |
| Specification | ASTM B550, 550M-07, AWS A5.24 |
ERZr2 Zirconium Copper Wire, UNS R60702 Zirconium tig Wire, Zirconium Welding Rods Wires Manufacturer in India
Zirconium Wire Mesh Chemical Structure
| Grade Chart | Sn | H | N | Zr+Hf | Hf | Fe+Cr | C | O | Nb |
| R60702/ERZr2 | - | <0.005% | <0.015% | 99.2% | <4.5% | <0.20% | <0.030% | <0.15% | - |
| R60704/ERZr3 | 97.5% | <4.5% | 0.2-0.4% | 1.0-2.0% | <0.005% | <0.015% | <0.030% | <0.16% | - |
| R60705/ERZr4 | 95.5% | <4.5% | <0.2% | - | <0.005% | <0.015% | <0.050% | <0.16% | 2.0-3.0% |
Zirconium Welding Wire Mechanical Properties Table
| DESIGNATION | TENSILE STRENGTH | YIELD STRENGTH 2% OFFSET |
PERCENT ELONGATION |
||
|---|---|---|---|---|---|
| KSI* | MPa** | KSI* | MPa** | ||
| Annealed (A) | 35 | 241 | 10 | 68 | 55 |
| Half Hard (1/2H) | 62 | 427 | 53 | 365 | 11 |
| Hard (H) | 68 | 468 | 60 | 413 | 10 |
| Extra Hard (XH) | 70 | 482 | 62 | 427 | 10.5 |
| Spring | 72 | 496 | 63 | 434 | 11 |
ERZr2 Zr Copper Wire Size Chart In Mm
| Dia in mm | Diameter in mm | Dia in inches |
|---|---|---|
| 1.14 | 1.2 mm | 0.045 |
| 1.57 | 1.6 mm | 0.03 |
| 2.3 | 2 mm | 0.04 |
| 3.175 | 3.15 mm | 0.047 |
PED Approved UNS ZR0929 Zirconium Wire Weight Chart, Zr702 Zr700 pure zirconium coiled wire, Check ASTM B550 zirconium 702 wire properties
UNS R60702 Zirconium tig Wire Physical Composition
| Melting Point | 1795 to 1975°F | 980 to 1080°C |
| Density | .321 lb/cu inch @ 68°F | 8.89 gm/centimeter@ 20°Celcius |
| Specific Gravity | 8.89 | 8.89 |
| Coefficient of Thermal Expansion | .000094 per °Farenheit (68-572°F) | .000017 per °Celcius (20-300°C) |
| Thermal Conductivity Chart | 212 BTU/sq ft/ft/hr/°Farenheit @ 68°F | .876 cal/sq cm/cm/sec/°Celcius @ 20°C |
| Electrical Resistivity (Aged) | 11.2 Ohms circ mil per ft @ 68°Farenheit | 1.86 microhm – cm @ 20°Celcius |
| Electrical Conductivity (Aged)† | 93% Copper IACS @ 68°F | .538 megohm cm @ 20°C |
| Specific Heat Treatment | .092 BTU/lb/°F @ 68°F | .092 cal/gm/°C @ 20°C |
| Modulus of Elasticity (tension) | 18,700 KSI | 13,000 kg/sq mm |
| Modulus of Rigidity in mm | 7300 KSI | 5000 kg/sq mm |
| Annealing Temperature †† in Celcius | 1600-1700°F | 870-970°C |
| Aging Temperature Annealed Hard |
930-1020°F (1-4 hr.) 700-890°F (1-4 hr.) |
500-550°C (1-4 hr.) 370-475°C (1-4 hr.) |